FUJIFILM photo chemicals are designed for specific use in FUJIFILM minilabs.
The latest FUJIFILM minilab chemicals offer the lowest replenishment rates available on the market today. This, in turn, means the lowest effluent and waste volumes.
CP-48S II, CP-48HVII, CP-49E, CP49LR and CN16S chemicals come in special packs designed to slot straight into the Frontier minilabs. Loading chemistry doesn't come any easier and the bottles are rinsed automatically to ensure that no concentrates remain in the bottle. This makes disposal even easier.
There is an extensive range for the different processes used in FUJIFILM minilabs and it is important to use the right type. Further information can be found by clicking here. Below you can find the process specifications.
If after looking at the below information you are still unsure which chemicals to use, send us an email.
Film Processes - Chemicals specifications
• FUJIFILM Negative • FUJIFILM Paper
OSTALI PROCESI
• Chemicals for Agfa (Paper) minilabs and Chemicals for Agfa (Film) minilabs • Chemicals for KIS minilabs • Chemicals for SM minilabs • Chemicals for standard minilabs
Paper chemicals for non-Fuji minilabs
• Chemicals for Agfa d-lab.1 and d-lab.2 • Chemicals for Agfa d-lab.3 • Chemicals for Agfa MSC 200 / 300 • Chemicals for Gretag SM • Chemicals for KIS DKS-15xx / Kodak System 89 DLS • Chemicals for KIS DKS-550C and DKS-750S • Chemicals for Noritsu SM • Chemicals for all standard process minilabs • Film chemicals for all minilabs
A general introduction to Fuji Hunt CPRA and EnviroPrint chemicals for the RA4 process can be found by clicking here. This also gives links to the following :
• Chemicals for Photofinishing • Chemicals for Professional Laboratories
Photographic paper and chemicals for use with Frontier are developed exclusively by Fujifilm, where decades of imaging expertise ensure optimum compatibility with the Digital Minilab Frontier. An extensive lineup is available to meet a range of imaging requirements.
